APE 3.8.1.12
Activating/deactivating changing of AMC IP settings via IAccesIPConfig Tool


AMC Firmware and Bootloader Update

# Bootloader 
	- Bootloader Version LCMV0049
		*	Go to Installfolder\Access Professional Edition\PE\Data\DLL folder folder and find the file LCMV0049.RUN
		*	Rename LCMV0049.RUN to LCMV0049.ORG
		*	Copy the patched LCMV0049.RUN to the folder
		*	In ACConfig, set Communication to Host: disable
		*	Set AMC to Bootloader mode: Reboot AMC by pressing the Reset button
		*	Start AccessIPConfig Tool 
		*	Scan AMC and select AMC for Upgrade
		*	Select Upgrade and Upgrade to version
		*	Navigate to Folder with new Bootloader file (e.g folder download) and select the Bootloader file LCMV0049.RUN
		*	Start the Upgrade. 
		*	When the Progress indicator shows Upgrade successful, the Upgrade is finished. Verify AMC is in Bootloader mode. New Bootloader is Installed
	
# Firmware 	
	Firmware files
	-	LCMV3758.run (Wiegand)
	-	LCMV6043.run (LBUS)
	-	LCMV6243.run (OSDP)


		* 	Navigate to folder Installfolder\Access Professional Edition\PE\Data\DLL
		*	Rename LCMVXXXX.RUN to LCMVXXXX.ORG
		*	Copy the patched LCMVXXXX.RUN to  folder
		*	Make sure New Bootloader file LCMV0049.RUN is in the folder
		*	Reset AMC

	
	
	
AMC Change IP Adress with AccessIPConfig


Normally this so called 'Provisioning Mode' is deactivated.
*	This means that changing IP settings via IpConfig Tool is normally disabled.*
*	For activating this feature you need to select the AMC network name display
*	in the LCD. 
*	Then press and hold the LCD key while showing the AMC network name.
*	After 5 seconds the LCD display changes to "Start provision"
*	Also, the 'N' before the network name changes to 'P' as long as provisioning
*	mode is active
*	Now you can change the IP settings via IPConfig tool.
*	The feature will be disabled automatically after
*	- 24 hrs -or-
*	- after the settings have been changed successfully -or-
*	- after pressing the LCD button (while displaying the AMC network name)
*	  for 5 SEC again.